Geothermal heat pumps are a practical alternative to the rising cost of natural gas, propane, fuel oil or electricity for keeping your home or business comfortable.

Heating and cooling using a water source and the earth itself may save up to 50% and sometimes more on typical energy bills. Also, water source systems don't burn fossil fuels and typically deliver 3 to 4 times more energy than they consume.

A geothermal heat pump keeps the home comfortable all year long. In the winter, heat is absorbed from the water or ground and transferred to the heat pump, where it is distributed to the home. In summer, hot air in the home is extracted and transferred to the water or ground.

There are two basic types of geothermal system: CLOSED LOOP and OPEN LOOP, but both consist of two main components--the heat pump and a tubing system installed outside the home. The tubing can be buried in the earth or submerged in the ground. The type of system you select is determined by your geographic area, your preference, and the availability of ground water or adequate land for burying loop pipes.

CALL HIGH EFFICIENCY FOR YOUR PROJECTS AND CONCERNS - 303 400 6043

High Efficiency does not do the drilling for Geo thermo, but we have teamed with Colorado Geothermal Drilling to design and drill the loop field for what every size project you have.  The drilling will be a separate contract depending on load calculation for heating & cooling requirements.